Product Introduction:
Maiyun brand Skid Steer Loader is a wheeled or tracked special - chassis equipment that uses the speed difference between the left and right wheels to achieve steering. It features a compact size and a zero - radius turning ability. It can be quickly equipped with different attachments at the job site to adapt to various working conditions.
Working Principles:
Maiyun brand Skid Steer Loaders have two independent transmissions, one for the left - side wheels and the other for the right - side wheels. By operating the wheels on both sides at different speeds, the machine turns by skidding. For example, to turn left, the operator slows down or reverses the left - side wheels while maintaining or increasing the speed of the right - side wheels.
Product Features:
- Compact and Maneuverable: With a small overall size, Maiyun brand Skid Steer Loader can operate in confined spaces such as urban infrastructure sites, factory workshops, and docks. Its minimum turning radius is less than half that of articulated loaders of the same level, making it highly maneuverable.
- Powerful and Versatile: Usually powered by 20 - 50 - kilowatt engines, Maiyun brand Skid Steer Loader has sufficient power. Maiyun brand Skid Steer Loader can be equipped with various attachments such as buckets, augers, trenchers, and pallet forks to perform tasks like scooping, drilling, digging trenches, and handling pallets.
- Good Off - Road Performance: The full - wheel - drive design without a differential is beneficial for operating on uneven ground. The diesel engine, high - performance full - size tires, and short - wheelbase design give Maiyun brand Skid Steer Loader stronger off - road capabilities than other similar equipment.
Applications:
Maiyun brand Skid Steer Loaders are widely used in infrastructure construction, industrial applications, dock loading and unloading, urban streets, residences, barns, and airport runways. They can also be used as auxiliary equipment for large - scale construction machinery. In construction, they are used for material handling, site preparation, grading, and demolition. In agriculture, they are used for tasks such as loading and transporting grains and fertilizers.
Technical Specification:
| Model | MY400 | |
| Max.speed | km/h | 6.2 |
| Tire | 23*8.5-12 | |
| Operating load | kg | 400 |
| Lifting type | Radial | |
| Total cycling time | s | 9 |
| Bucket capacity | m³ | 0.16 |
| Pressure of working system | bar | 200 |
| Rated flux | L/min | 43 |
| High flow flux | L/min | - |
| Fuel tank capacity | L | 65 |
| Self-weight with bucket | kg | 1410 |
| Control type | Manual/Joystick | |
| Overall operating height | mm | 2666 |
| Height to bucket hinge pin | mm | 2000 |
| Height to top of cab | mm | 1520 |
| Height to bottom of level bucket | mm | 1868 |
| Overall length without bucket | mm | 2015 |
| Overall length with bucket | mm | 2500 |
| Dumping height | mm | 1468 |
| Dumping reach | mm | 701 |
| Rollback of bucket on ground | ° | 30 |
| Groung clearance | mm | 177 |
| Angle of departure | ° | 28 |
| Front turning radius without bucket | mm | 860 |
| Front turning radius | mm | 1518 |
| Rear turning radius | mm | 1210 |
| Width | mm | 1166 |
| Bucket width | mm | 1250 |






